 |
 |
 |
|
| Designed for the living room, Lian Li engineers have designed the PC-C33's size to match and compliment standard audio equipment, whilst leaving enough room for a standard size 5.25" ODD and four 3.5" HDDs. This case is designed to work with ATX motherboards, with space for a standard ATX power supply. |
|
|
|
|
|
 |
|
 |
|
Features
Key Features
The PC-C33 is designed for today's user who wants to access more media files, with the highest quality and silky look, and more internal space for the power user!
Designed for the living room, Lian Li engineers have designed the PC-C33's size to match and compliment standard audio equipment, whilst leaving enough room for a standard size 5.25" ODD and four 3.5" HDDs. This case is designed to work with ATX motherboards, with space for a standard ATX power supply.
There is a linker bar to enhance the structure of PC-C33, and help the case to support the weight of any items placed above, as users normally stack equipment on top of each other.
The PC-C33 has equipped modularized device cages, and those cages can fit standard hardware components. They're very simple to use and it's easy to get the hardware ready for this case.
Lian Li designers look into every detail - the PC-C33 has equipped an anti-vibration kit on the chassis, to absorb the noise. Like the EMI spring on the top cover, it absorbs the vibrations, whilst leaving the top cover easy to remove and close.
To reduce the vibration from HDDs, Lian Li has included a HDD anti-vibration kit which uses rubber rings to absorb the virbrations and reduce the noise.
There are four high quality aluminum case stands. They not only look good, they also have rubber pads to absorb vibrations, and prevent any scratches to the equipment underneath.
Aluminum can remove heat four times faster than steel, therefore PC-C33's aluminum alloy chassis can help your system to stay at a cooler temperature, and extend your components' lifecycle.
There are two 80mm exhaust fans at the rear of the chassis, running at 1200RPM. Both of them have fan guards fitted to protect the user's hands. They're silent but can still move a good volume of air.
There is a 140mm exhaust fan beside the HDD cage, it runs at 1200RPM and brings a good volume of air through the cage. This will help to keep the temperature of the HDDs down.
The PCI brackets have vent holes for extra cooling to PCI add-on cards.
Multi-media port connectors follow international specification standards, with one connector for easy installation
Audio supports HD Audio and AC97 Audio design for better compatibility
All I/O ports on the front panel allow for easy access - there is also a dust-free cover to protect these connectors.
PC-C33 comes fitted with a protector on the edge, and all the shrpe edges have been removed to protect the user's hands!
Specifications
|
Model : |
PC-C33 |
|
Case Type : |
Desktop / HTPC |
|
Dimensions : |
425mm x 168mm x 460mm (W x H x D) |
|
Front bezel Material : |
Aluminum |
|
Top Panel : |
Aluminum |
|
Body Material : |
Aluminum |
|
5.25" drive bay (External) : |
2 |
|
3.5" drive bay (External) : |
0 |
|
3.5" drive bay (Internal) : |
4 |
|
Expansion Slot : |
7 |
|
Motherboard : |
ATX, M-ATX |
|
System Fan (Front) : |
140mm Ball-Bearing Fan @ 1200RPM x 1 |
|
System Fan (Top) : |
N/a |
|
System Fan (Rear) : |
80mm Ball-Bearing Fan @ 1200RPM x 2 |
|
I/O Ports : |
USB2.0 x 4, IEEE1394 x 1, ESATA x 1, HD+AC97 Audio |
|
|
|
 |
|
 |
|
|
|
