Features
Description
Lian Li have always put a lot of effort into it's products, using the
latest manufacturing techniques. In some processes, Lian Li is still
assertively using hand crafting in certain steps of its production.
Because some unique techniques can't be replaced by machines, it shows
how much effort Lian Li has put into it's products.
The PC-B71 is the case where functionality and style converge, with
features including the upright removable E-ATX motherboard tray,
anti-vibration HDD racks, two14cm blue LED silent intake fans with
filter in the front, other two12cm silent intake fans in the back, top
mounted multi-media I/O ports, and the graphics card holder, and lots
more – because when it comes to your comfort, every detail counts
User Interface is very important in Lian Li chassis. The external
fixture, user interface, and the internal structure all has been tested
to meet Lian Li’s high quality standard. In 2009 Lian Li launched the
new PC-B71, with all aluminum alloy chassis, round edge design with
stylish look. PC-B71 has hair-line brush anodized aluminum finishing
with diamond cut detail.
Key Features
Huge internal space fits E-ATX motherboards, and graphics
cards, which can be up to 345mm long, and there is room for 10 hard
drives also there is space for dual power supply units. There are 2 x
12cm and 2 x 14cm cooling fans to cool the system down, and a lot of
internal space for liquid cooling system. It is an ideal for gamers and
pro users!
All new PCI lock design, switch the lock off , install the extra card then switch it on. Easily and quickly.
The new switch design for CD-ROM Drive bay, users can easily remove
Drives without screws. and Lian-li designer have use rubber pad to
absorb the vibration to reduce the noise, and to firmly hold it in
place.
The PC-B71 is equipped with SATA Raid HDD cage to make your life
easier. You can have more time to enjoy your life, no more working with
wires. It will also support Raid function. ( Support required from the
M/B or SATA Raid Card chipset)
The PC-B71 features a door with a lock on the HDD front panel which
secures the SATA/ SAS Hot Swappable HDD Cage inside the case. It
supports up-to seven HDDs. Users can easily switch HDDs as needed. The
SATA / SAS back panel doesn’t feature any raid natively and functions
as a pass-through and so it requires a compatible motherboard for the
RAID and hot swap SATA / SAS functions.
There are two silent 14cm ball-bearing intake blue LED fan (1200RPM) which brings cold air into the chassis
The drive bay cage has with rubber pads to absorb the vibration and reduce the noise.
The Front panel is mounted with a specially made plastic kit, this
prevents the metal parts touching each other, and reduces the noise by
reducing the vibration.
Lian Li designers consider every detail. The PC-B71 is equipped
with anti-vibration clips and grommets on the chassis, to absorb the
noises created by vibrating and spinning parts. The EMI spring on the
top cover absorbs the vibrations, without interfering with the side
panel.
PC-B71 is using "Thermal Tunnel" solution, the two 140mm fans in
the front input cold air into the system, the two 120mm fans and the
PSU's fan draw the hot air out as a heat circulation.
PC-B71 Features a three-speed fan controller, user can adjust the
fan speeds to get the best balance between silent and increased
cooling. Factory setting are default at Mid Speed, but user can adjust
the fan speed as needed.
There are two 140mm intake blue LED fan on PC-B71, The fan can
output high air flow volume with lower RPM to push the cold air through
the HDD rack. It connected to a three-speed controller, factory setting
at middle(980RPM), user can adjust it to suit.
There is a 120mm exhaust fan behind HDD cage to draw the hot air out, and improve the air flow inside the chassis.
Specifications
|
Model :
|
PC-B71
|
|
Case Type :
|
Full Tower Chassis
|
|
Dimensions :
|
220mm x 595mm x 590mm
(W x H x D)
|
|
Front bezel Material :
|
Aluminum
|
|
Side Panel :
|
Aluminum
|
|
Body Material :
|
Aluminum
|
|
Net Weight :
|
|
|
5.25" drive bay (External) :
|
5 (one for 3.5 inch convertor)
|
|
3.5" drive bay (External) :
|
1
|
|
3.5" drive bay (Internal) :
|
10
|
|
Expansion Slot :
|
7
|
|
Motherboard :
|
E-ATX, ATX, M-ATX
|
|
System Fan (Front) :
|
2 x 140mm blue LED fan (1200RPM)
|
|
System Fan (Rear) :
|
2 x 120mm Ball-Bearing Fan (1500RPM)
|
|
I/O Ports :
|
USB2.0 x 4, IEEE1394 x 1, ESATA x 1, HD+AC97 Audio
| |
|
