 |
 |
 |
|
| Simpy a superb gaming case for those wanting a high quality alu case with great cooling and pre-mods |
|
|
|
|
|
 |
|
 |
|
Features
At the end of 2007, Lian Li launched the famous ARMORSUIT series of gaming chassis to the market. Now, in 2009, Lian Li has introduced introduce the unbeatable ARMORSUIT PC-P50R for the PC gaming enthusiasts, and gaming professionals who want a high quality product with a unique flavor. The ARMORSUIT PC-P50R is manufactured in TAIWAN; handcrafted from high quality aluminum and incorporates Lian Li’s finest workmanship which has built up over more than two decade’s worth of experience.
The ARMORSUIT carries Lian Li’s high standard of Quality requirement. All the sharp edges have been removed for user’s safety. In addition, the external and internal surfaces have hair-line brush anodized aluminum in keeping with Lian Li’s classical style.
Lian Li redesigned the internal layout for a better thermal solution, ARMORSUIT PC-P50R uses large size cooling fans to remove the system heat faster and quieter as well as keeps the system more stable.
Key Features
The cutting edge tool-less design is an important key feature in 2009 Lian Li cases. Lian Li designer considered end user requirements, like those who need to build systems faster, or swap out components often. The brand new tool-less modules can make Lian Li users’ life much more convenient.
The look of ARMORSUIT PC-P50R has no door panel design; users can access the external drive easier. The two red stripes on the front panel done in attractive anodized aluminum give a flamboyant finishing touch to this outstanding high-end chassis.
Lian Li manufacture the ARMORSUIT PC-P50R in Taiwan. The quality and craftsmanship are outstanding. With accolades and awards stretching back for the last two decades due to the unique combination of hand-crafted aspects with advanced machinery. The complete effort used to create every Lian Li chassis is clearly evident in the superior craftsmanship to be found in each one.
The hardware installation with ARMORSUIT PC-P50R is very easy and simple. The front panel and top panel are detachable and they can be removed without tools.
The new ARMORSUIT PC-P50R is targeted for the LAN party gamers. It is a mid-tower case, which is ideal for the latest graphics cards in combination with the best thermal dynamics. All the internal installation can be done without tools, and is easily adjustable to optimize your hardware setup. Especially in the advent of adding in new graphics cards, equipped with 8 PCI slots, can hold three or more graphics cards, supports CrossfireX™ and 3-way SLI™.
The new internal layout has the motherboard on top of the power supply unit, which allows for easier access to the motherboard as well as more room above, thus larger CPU coolers can be used. The power supply unit at the button of the case is cooled with fresh cool air directly from the outside of the case, instead of pre-heated air from within. This will bring down the core temperatures and extend the lifespan of the PSU significantly.
To install the motherboard requires no tools, use tool-less screws to screw a motherboard on case, easily and quickly.
The ARMORSUIT PC-P50R is equipped with large cooling fans, with low RPM, which still provide enough air flow to cool down the hardware adequately. The front 120mm intakes fan runs at 1200RPM. The top two silent 140mm ball-bearing fans exhaust the hot air out at 1000RPM, and the rear 120mm fan extracts the hot air out at 1500RPM.
The fans on the top panel are mounted with Lian Li’s new anti-vibration fan mounting system; the rubber ring grommet absorbs the vibrations, keeping the case silent.
The new 5.25” bay tool-less mounting incorporates a mounting bar equipped with rubber padding. After closing the mounting bar, the rubber pad pushes and holds the 5.25” device in position to both secure and absorb vibration from the device.
Lian Li designers spent months to upgrade Lian Li’s HDD cage; the new HDD cage also has rubber suspension. The buckle has two flip switches which act like two springs to hold the HDD in place, and then also absorb and reduce vibrations.
The aluminum PCI tool-less mounting module is equipped with a rubber pad which can hold the graphics card firmly while closing the gap found in the PCI bracket and PCI slot to reduce noise from escaping air and further reduce vibrations.
The Power Supply has rubber pads for both insulation and support. The mounting clip is also aligned with rubber to reduce vibrations but also and also secure the PSU without scratching the painted surface.
ARMORSUIT PC-P50R inputs cold air by the 120mm intake fan, it can be reposition by adjust the HDD cage. There are also vents on the 5.25” bezels, allowing cold air to enter the case to cool the system down
The two 140mm fans on the top cover and the 120mm fan at the rear exhaust the hot air out from the system. The fans cover the whole motherboard, and they can remove the heat fast.
The rear 120mm exhaust fan is just next to the CPU, it can remove the hot air out fast and silently.
The power supply unit is at the bottom of the case. It can draw in cold air directly through the vent below the power supply unit. This cooler, fresh air will keep your PSU components cooler and more stable and thus extend the PSU lifecycle.
The ARMORSUIT PC-P50R supports liquid cooling systems, the two holes at the rear of the case allow water tubes to pass through, and the rubber cover can protect the tubes away from cutting.
Specifications
|
Model : |
ARMORSUIT PC-P50R |
|
Case Type : |
Advanced Midi Tower |
|
Dimensions : |
210mm x 495mm x 490 mm (W x H x D) |
|
Front bezel Material : |
Aluminum |
|
Colour : |
Red |
|
Side Panel : |
Transparent Side Panel |
|
Body Material : |
Aluminum |
|
5.25" drive bay (External) : |
9 |
|
3.5" drive bay (Internal) : |
3 (Uses 5.25" x 3) |
|
Expansion Slot : |
8 |
|
Motherboard : |
ATX / M-ATX |
|
System Fan (Front) : |
120mm Red LED Fan x 1 (1200RPM) |
|
System Fan (Top) : |
140mm Red LED Fan x 2 (1000RPM) |
|
System Fan (Rear) : |
120mm Red LED Fan x 1 (1500RPM) |
|
I/O Ports : |
USB2.0 x 2, HD+AC97 Audio |
|
|
|
 |
|
 |
|
|
|
