 |
 |
 |
|
| Huge internal space fits ATX motherboard, and graphics card which up to 300mm long, and there are roomfor 4 hard drivers, optimized cooling performance of total 4 x 120mm cooling fans for best cooling performance. |
|
|
|
|
|
 |
|
 |
|
Features
Key Features
Open the side panel with the tool-less latch, the removable HDD
cages, 2 x120mm silent intake fans with filter, 2 x 120mm silent
exhaust fans, and top mounted multi-media I/O ports have been
redesigned – because when it comes to your comfort, every detail counts
Rounded edge, unlike other chassis, using 1.5mm to 2mm thick
aluminum panel formed to this unique design. The vents are at the side
of the case, only one line of diamond cut detail on the front panel, to
keep the design minimal.
TYR PC-X500 has multi-heat zones design to have better thermal solution and tidy up internal space.
Huge internal space fits ATX motherboard, and graphics card which
up to 300mm long, and there are roomfor 4 hard drivers, optimized
cooling performance of total 4 x 120mm cooling fans for best cooling
performance.
TYR PC-X500 using large size fans to improve the silent issue,
there is two120mm fan in the front and the one 120mm fan at the rear
feature low RPM with high air flow to get the best balance between
silent and cooling
There are anti-vibration kits fitted in the chassis to stop the vibration which cause the noise.
There are sound insulation material on the internal side of the 2mm thick side panel to reduce the noise level.
There are 120mm intake fans(speed adjustable from1020-1200-1500RPM;
factory set to mid speed),large size fan can run in slow RPM, but still
can input a large amount of air to cool the system down.
There are two air intake vents at the side of the case, allow cold
air to enter the case to cool the system down. There are air filter
fitted with intake fans.
There is a 120mm exhaust fan at the rear of the case in the M/B
zone(speed adjustable from 1020-1200-1500RPM; factory set to mid
speed), it can remove the system hot air out of the case fast and run
silently.
There are a 120mm exhuast fan at the rear of the Upper zone, and
the fan speed can be adjust from 1020 to 1200 to 1500RPM, to remove the
hot air out of the case.
TYR PC-X500 has fitted a three speed fan controller, user can
adjust the fan speed to get the best balance between silent and cooling.
For professional users, TYR PC-X500 also support liquid cooling
system, there are four openings at the rear for water tube to pass
through.
To install the power supply unit into TYR X-500 is easy, just slide
the power supply unit throguh the opening at the rear of the case, and
there are room for 180mm long power supply. If user need more space,
there is a power supply extension kit.
Specifications
|
Model :
|
TYR PC-X500
|
|
Case Type :
|
Super Midi Tower Case
|
|
Dimensions :
|
230mm x 380mm x 585mm
(W x H x D)
|
|
Front bezel Material :
|
Aluminum
|
|
Side Panel :
|
Aluminum + Sound Insulation Material
|
|
Body Material :
|
Aluminum
|
|
5.25" drive bay (External) :
|
2
|
|
3.5" drive bay (External) :
|
1
|
|
3.5" drive bay (Internal) :
|
4
|
|
Expansion Slots :
|
7
|
|
Motherboard :
|
ATX, M-ATX
|
|
System Fan (Front) :
|
2 x 120mm Fan (1020-1200-1500RPM, Factory set to mid speed)
|
|
System Fan (Rear) :
|
2 x 120mm Fan (1020-1200-1500RPM, Factory set to mid speed)
|
|
I/O Ports :
|
USB2.0 x 4, IEEE1394 x 1, E-SATA x1, HD+AC97 Audio
|
|
|
|
|
 |
|
 |
|
|
|
