X-case are sole Uk importers of Lian Li lancool cases. -
| Quality |
 |
LanCool insisted on providing highest quality products, and all the products are made in Taiwan , with high standard workmanship and best material. |
 |
For external finishing, LanCool used the high quality Taiwan made aluminum alloy panel on Metal Boned K7. With hair-line brush and anodized treatment on the surface, to make the external in metallic finishing. Most the sharp edges has been removed, or cover up with protection for maximum safety |
 |
Metal Boned K7 designed for LAN party users, from external design to internal features. The user interface, hardware structure, and finishing, all require to pass a lot of test to ensure highest product quality. |
 |
Metal Boned K10 has unique look, simple lines, thick aluminum extrusion door with intake vent holes, all design with purpose. Nothing is un-necessary. |
 |
LAN party user need solid chassis which can maintains in good shape to house their hardware during travel. The housing is 0.8mm thick SECC, strength 40% tougher, external in aluminum, easy to cut and modify |
| Feature |
 |
Metal Boned K series has metal structure, for tougher housing, allow carry heavy hardware, built for LAN Party Gamers. |
 |
K10 has equipped with powerful cooling system, there are two 120mm intake fans in the front, one 120mm exhaust fans at the rear ( plus the fan in the power supply units), there will be total of two intake fans, and two exhaust fans, perfect cooling solution. |
 |
The 120mm fans on Metal Boned K10, features high airflow in low RPM, these fans can cool the system down, with lower noise level. All the fans are 1000RPM. |
 |
There are special made anti-vibration HDD kit with rubber suspension. The rubber suspension absorb the vibration to reduce the noise. |
 |
There are anti-vibration spring on the chassis, to reduce the noise which cause by the vibration. |
 |
K10 has equipped sound insulation material on the top cover and side panels, to reduce the noise from system. |
| Thermal |
 |
The dual 120mm intake fans, at 1000RPM, input cold air into the system. The dimension of the two intake fans, allow the fan to cover most of the areas. |
 |
The rear 120mm exhaust fan at the rear, at 1000RPM, to remove the hot system air out, to complete the airflow circulation. |
 |
For more cooling performance, K10 supports liquid cooling system, there are two opening at the rear allow water tubes to pass through. |
 |
There are vents on the PCI bracket, allow the better airflow, there are vent holes next to the PCI slots are for optional PCI / Graphics Card Cooler. |
| Friendly |
 |
There are air filters in front of the two 120mm intake fans, to stop the dust to enter the housing, and these air filter are washable for replete use. |
 |
The installation of optical drive on Metal Boned K10 is easy, simply slide in the drive into the 5.25” rack, and the plastic mounting kit will secure it in position, to remove it, simple pull the mounting kit to release the drive. |
 |
It is easy to install motherboard, K10 features removable motherboard tray, user can install the motherboard on the tray outside the case, no more working in small space. |
 |
There are two cable clips behind the motherboard tray, user can tidy up the cable, and hide the cables behind the motherboard |
 |
Power Supply bracket for support today's power supply unit which are heavy, and the bracket will hold the power supply in position while traveling. |
 |
The opening swing direction of the door panel can be adjust to suit user's need, it can allow user to place the chassis at right or left side of the table. |
 |
The top cover is removable, for user to service or upgrade system easier, and there are optional top cover for liquid cooling system. |
 |
The multi-media I/O ports are on the top cover, for easy access, there is also a dust-free cover to protect those I/O ports. |
| Model |
PC-K10 |
| Case Type |
Hybrid Mid Tower |
| Dimensions |
210 x 450 x 522 (W x H x D) |
| Front bezel Material |
Aluminum |
| Color |
Silver /Black |
| Side Panel |
Plain |
| Body Material |
0.8mm SECC |
| Net Weight |
NA |
| 5.25" drive bay (External) |
3 |
| 3.5" drive bay (External) |
1 |
| 3.5" drive bay (Internal) |
5 |
| Expansion Slot |
7 |
| Motherboard |
ATX / Micro ATX |
| System Fan (Front) |
120mm Silent fan x2 (@1000RPM) |
| System Fan (Top) |
NA |
| System Fan (Rear) |
120mm Silent fan x1 (@1000RPM) |
| I/O Ports |
USB2.0 x4 / IEEE1394 x1 /E-SATA x1/ HD+AC97 Audio |
|
Email to Friend
