I bought this case as a solution for moving my rigs into other rooms during winter, to take advantage of excess heat - needless to say I am very happy with the quality and ease of assembly, definitely will be buying more in future. Upon opening the box everything was nicely bubble wrapped and protected for transit, something you don't normally see from manufacturers. A couple of things to note for anybody wanting to purchase; 1. If you have different sized cards (specifically longer cards and shorter cards) in the rig you may struggle a bit getting the mounting bar to the right level - this is no fault of Xcase though, there are lots of different options for mounting, just in my case the cards vary too much (I resolved it with some good old zip ties). 2. The fans you will need for this case will vary depending on your ambient temperature and what cards you put in, I used 10 x Arctic P12s and it's running nice and cool under 50c all cards, ambient temp 21-22c.
The case overall is great although a bit tight when fitting 3080 and 3090 graphics cards. Height could do with being increased by an inch or two to accommodate these. Fan size was not listed on website but is a standard 120mm. It would be nice if screw fittings for mother board used standard screws rather than Alan key due to tight space, also if motherboard risers were included as several screw fittings were short which made fitting a standard ATX motherboard difficult.