ValueRAM's KVR26S19S6/4 as a 512M x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 512M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin SODIMM uses gold contact fingers.
Power Supply_ VDD = 1.2V Typical
VDDQ = 1.2V Typical
VPP = 2.5V Typical
VDDSPD = 2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for
data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
8 internal banks; 2 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8
via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB_ Height 1.18" (30.00mm)
RoHS Compliant and Halogen-Free
Lifetime
0.0225 kg
Warranty Package Weight Series PC4-21300 DDR Type SODIMM DDR4 Size 1 x 4GB #Hide#Individual Module Size 4GB Speed 2666 MHz Compliance Pins Retail 260-pin CAS Latency 19-19-19 Data Integrity Check Non-ECC Voltage 1.2V Additional Information See Overview Package Type
We are currently very short on Chassis stock, Our normal supply from China is Held due to massive price increases in container shipping - up 700% from January.
If this does not resolve itself soon we will have little choice but to ship stock to the UK but prices will increase at least 25%.
