ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA
components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.
Features
Power Supply_ VDD=1.2V Typical
VDDQ = 1.2V Typical
VPP - 2.5V Typical
VDDSPD=2.2V to 3.6V
Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
Low-power auto self refresh (LPASR)
Data bus inversion (DBI) for data bus
On-die VREFDQ generation and calibration
Single-rank
On-board I2 serial presence-detect (SPD) EEPROM
16 internal banks; 4 groups of 4 banks each
Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
Selectable BC4 or BL8 on-the-fly (OTF)
Fly-by topology
Terminated control command and address bus
PCB_ Height 1.23” (31.25mm)
RoHS Compliant and Halogen-Free
Warranty No #Hide#LED Lighting No Additional Information See Overview Package Type Blister Pack Package Weight 0.0225 kg Lifetime 19-19-19
Heatspreader Timings Series 2666 MHz DDR Type DDR4 Size 1 x 8GB #Hide#Individual Module Size 8GB #Hide#Total Capacity 8GB Total Speed Compliance 1.2V Typical PC4-21300 Pins 288-pin CAS Latency CL19 Data Integrity Check Non-ECC Low Voltage No Voltage